Elenco Periferiche Desktop Principale

lspci
00:00.0 RAM memory: nVidia Corporation MCP61 Memory Controller (rev a1)
00:01.0 ISA bridge: nVidia Corporation MCP61 LPC Bridge (rev a2)
00:01.1 SMBus: nVidia Corporation MCP61 SMBus (rev a2)
00:01.2 RAM memory: nVidia Corporation MCP61 Memory Controller (rev a2)
00:02.0 USB Controller: nVidia Corporation MCP61 USB Controller (rev a3)
00:02.1 USB Controller: nVidia Corporation MCP61 USB Controller (rev a3)
00:04.0 PCI bridge: nVidia Corporation MCP61 PCI bridge (rev a1)
00:05.0 Audio device: nVidia Corporation MCP61 High Definition Audio (rev a2)
00:06.0 IDE interface: nVidia Corporation MCP61 IDE (rev a2)
00:07.0 Bridge: nVidia Corporation MCP61 Ethernet (rev a2)
00:08.0 IDE interface: nVidia Corporation MCP61 SATA Controller (rev a2)
00:0d.0 VGA compatible controller: nVidia Corporation C61 [GeForce 6150SE nForce 430] (rev a2)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] HyperTransport Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Miscellaneous Control
00:18.4 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Link Control

lsusb
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 003: ID 0d49:3200 Maxtor 
Bus 001 Device 002: ID 04a9:1904 Canon, Inc. 
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

CategoryHomepage

-  ⇤ ← Versione 11 del 29/05/2010 22.02.59 → 
  Dimensione: 1188
  Autore: Carlin0
  Commento:
+   ← Versione 109 del 26/06/2011 02.20.07 → ⇥
  Dimensione: 1713
  Autore: Carlin0
  Commento:
-Le cancellazioni sono segnalate in questo modo.
+Le aggiunte sono segnalate in questo modo.
 Linea 1:
-## page was renamed from Carlin0/Prove0
+<<Indice(depth=2)>>
 Linea 3:
-[[Indice()]]
+= Elenco Periferiche Desktop Principale =
 Linea 5:
-''' Guida alla configurazione di Amule '''
+{{{
lspci
00:00.0 RAM memory: nVidia Corporation MCP61 Memory Controller (rev a1)
00:01.0 ISA bridge: nVidia Corporation MCP61 LPC Bridge (rev a2)
00:01.1 SMBus: nVidia Corporation MCP61 SMBus (rev a2)
00:01.2 RAM memory: nVidia Corporation MCP61 Memory Controller (rev a2)
00:02.0 USB Controller: nVidia Corporation MCP61 USB Controller (rev a3)
00:02.1 USB Controller: nVidia Corporation MCP61 USB Controller (rev a3)
00:04.0 PCI bridge: nVidia Corporation MCP61 PCI bridge (rev a1)
00:05.0 Audio device: nVidia Corporation MCP61 High Definition Audio (rev a2)
00:06.0 IDE interface: nVidia Corporation MCP61 IDE (rev a2)
00:07.0 Bridge: nVidia Corporation MCP61 Ethernet (rev a2)
00:08.0 IDE interface: nVidia Corporation MCP61 SATA Controller (rev a2)
00:0d.0 VGA compatible controller: nVidia Corporation C61 [GeForce 6150SE nForce 430] (rev a2)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] HyperTransport Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Miscellaneous Control
00:18.4 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Link Control
}}}
-Linea 7:
+Linea 26:
-= Impostare IP Statico =
+{{{
lsusb
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 003: ID 0d49:3200 Maxtor 
Bus 001 Device 002: ID 04a9:1904 Canon, Inc. 
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
}}}
-Linea 9:
+Linea 34:
-Per impostare un IP statico di LAN su Ubuntu prima di tutto bisogna conoscere l’IP del proprio router,per fare cio scrivere in un terminale

''route -n''

il terminale darà una risposta tipo questa

''Tabella di routing IP del kernel[[BR]]
Destination     Gateway         Genmask         Flags Metric Ref    Use Iface[[BR]]
192.168.0.0     0.0.0.0         255.255.255.0   U     1      0        0 eth0[[BR]]
169.254.0.0     0.0.0.0         255.255.0.0     U     1000   0        0 eth0[[BR]]
0.0.0.0         192.168.0.1     0.0.0.0         UG    0      0        0 eth0''


= Configurazione Porte =

= Aggiornamento Server =

= Rete Kad =

= Preferenze =

== Connessione ==

== Cartelle ==

== Server ==

= Semplici Accorgimenti =

Se abbiamo gia configurato il router perchè usiamo emule sotto Windows e tutto funziona bene cioè abbiamo ID alto e kad connesso , basterà impostare su Amule le stesse porte (tcp e udp) e lo stesso IP Statico su Ubuntu per usufruire delle medesime impostazioni ;)

----
+-----